Stratos GTV 226cc Lamellar

The Stratos 226cc Lamellar cylinder kit was born as a road upgrade of a purely racing cylinder. Thanks to the reed valve it turns out to be a brilliant cylinder, ready from low revs. The Stratos 226cc is made from cast aluminum with a highly hard nickel-chrome treated barrel.

The Stratos 226cc Lamellar is the top of the range cylinder kit created by the Stratos Racing Line R&D department.

Thanks to the specific radial copper gasket, it is possible to obtain maximum compression performance by decreasing the squish height by up to 0.9/1.0 mm; keeping the working temperature perfectly unchanged, thus guaranteeing maximum power and reliability.

Features of the Stratos 226cc:

• Lamellar suction with integrated flow diverter. Ultra-tested lamellar pack with a glass nite cusp and petals to guarantee linear and homogeneous dispensing.
• Round exhaust (TS1 type) with flow modeling.
• 6 transfers with different heights between primary, secondary and tertiary in order to guarantee maximum filling of the combustion chamber in the shortest possible time.

The kit consists of:

• 1 – 226cc aluminum STRATOS cylinder
• 1 – graphite forged BORGO piston with lateral lightening holes Ø 70.00 mm
• 1 – Stratos DP red head with specific self-centering bushings
• 1 – set of brass head nuts
• 1 – racing reed valve pack
• 1 – intake manifold complete with screws and washers. The manifold is for 26/30 or 32/35 carburettors (communicate this when ordering)
• 1 – annealed copper radial head gasket
• 1 – cylinder base gasket thickness 0.5 mm
• 1 – cylinder base gasket thickness 0.8 mm
• 1 – round exhaust gasket
• 2 – lamellar pack paper gasket
• 2 – exhaust studs
• 2 – exhaust nuts

! Recommended configurations:

• Base con un carburatore Dellorto PHBH 30 e marmitta Dritta Stratos
• Prestazionale con carburatore da 35 ed espansione MontelleryStratos erogando fino a 30/32 cv.

!! Si raccomanda l’uso diOlio Stratos SINT 2T specifico per cilindri in alluminio.

!!! To install the Stratos 226cc Lamellar you may be interested in:

• long stud set for Stratos cylinder